how to unlock nokia x7

1 - Switch ON your phone without SIM Card,
 2 - As if making a phone call, on your dial pad compose: #PW+UNLOCKCODE+1#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
 3-The phone will show "SIM Restriction Off"

 * NOKIA X7 has been unlocked now

 Nokia's phone has only 3 attmepts to unlock the phone, after that it become hardlocked if you are getting messege " Cannot Undo Restriction " or "Not Allowed" Then it means your phone is Hardlocked In that case you do need to follow the following Instruction to reset the counter.

 How to unlock Hardlocked NOKIA X7 Instuctions


You will require the following:
  • A USB Cable for your Nokia phone. 

  • The correct USB Cable Drivers. Installing the 'Nokia PC Suite' software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers.  You can find it HERE

  • A small software application that you can download from HERE.
  • The unlock code sent to you by us,

Once you have all of these, follow the directions below:


  1. Switch on your phone without a sim card. You should be prompted to 'Start Phone Without SIM Card' or similar. Click 'Accept' or 'OK'. Your phone is now in offline mode.

  2. Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode', mass storage mode etc... stay in this screen, do not select any of the options.

  3. Start the SendCodeUsb application you downloaded earlier and click on the 'Read Phone Info' button. The application should display several lines of information. If it says "not found" replug your phone into the usb, and then click read phone info

  4. If the application still displays 'Not Found', your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone.
  5.    From the drop down menu chose bb5 Counter reset and click on do Job it will reset the counter.
  6. Once it is done you can follow the above instructions to insert the code.